Fluke Digital Multimeter

Rugged and accurate enough for professional use, the Fluke 115 Multimeter for Field Service Technicians is ideal for a wide variety of electrical and electronic testing applications. Offering Min/Max/Average measurements with elapsed time to record signal fluctuations, this True-RMS meter provides easy one-handed operation in a compact package. Lightweight and compact, the Fluke 115 is easy to handle, making it the perfect choice for measuring components, voltages, and circuits on the go. Accurate, easy-to-use, and comfortable to carry in the palm of your hand, this multimeter does it all. Use it on the jobsite or around the house--wherever and whenever you need a general purpose, portable meter that gives clear, accurate readings. Complete with a backlit 6,000-count digital display that features large digits for easy reading, the Fluke 115 is exceptionally user friendly. Its straightforward labeling clearly shows the function of each button, dial, and jack. And best of all, this True RMS meter gives you easy-to-understand readings. For example, a simple beep indicates when a wire or fuse is functioning properly--no beep means it's time to recheck your settings. Offering a DC ma range that can handle everything from 200ma to 1A, the Fluke 115 allows you to check continuity, frequency, capacitance, and diode test. It measures 20 A (30 seconds momentary, 10 A continuous) and even provides accurate measurements on non-linear loads. Additionally, its operating temperature range of -10 degrees to +60 degrees Celsius combines with durable casing for maximum resistance to wear and tear. An added bonus, overload protection ensures uninterrupted operation and long life. CAT III 600-volt safety rated, the Fluke 115 is UL, CSA, TUV, and VDE listed, and all of its inputs are protected to CE, IEN61010-1 CAT III 600V.
  • MELD Workshop
  • 01 September, 2013
  • Fluke 115
  • electronics
  • Maximum voltage between any terminal and earth ground: 600 V
  • Surge protection: 6 kV peak per IEC 61010-1 600 VCAT III, Pollution Degree 2
  • Display: Digital: 6,000 counts, updates 4 per second
  • Bar graph: 33 segments, updates 32 per second

Accuracy Specifications

DC millivolts
Range:  600.0 mV
Resolution:  0.1 mV
Accuracy:  ± ([% of reading] + [counts]): 0.5% + 2

DC volts
Range/Resolution:  6.000 V / 0.001 V
Range/Resolution:  60.00 V / 0.01 V
Range/Resolution:  600.00 V / 0.1 V
Accuracy:  ± ([% of reading] + [counts]): 0.5% + 2


AC millivolts1 true-rms
Range:  600.0 mV
Resolution:  0.1 mV
Accuracy:  1.0 % + 3 (dc, 45 Hz to 500 Hz)2.0 % + 3 (500 Hz to 1 kHz)

AC volts1 true-rms
Range/Resolution:  6.000 V / 0.001 V
Range/Resolution:  60.00 V / 0.01 V
Range/Resolution:  600.0 V / 0.1 V
Accuracy:  1.0 % + 3 (dc, 45 Hz to 500 Hz)2.0 % + 3 (500 Hz to 1 kHz)

Continuity
Range:  600 Ω
Resolution:  1 Ω
Accuracy:  Beeper on < 20 Ω, off > 250 Ω; detectsopens or shorts of 500 μs or longer.

Ohms
Range/Resolution:  600.0 Ω / 0.1 Ω
Range/Resolution:  6.000 kΩ / 0.001 kΩ
Range/Resolution:  60.00 kΩ / 0.01 kΩ
Range/Resolution:  600.0 kΩ / 0.1 kΩ
Range/Resolution:  6.000 MΩ / 0.001 MΩ
Accuracy:  0.9 % + 1
Range/Resolution:  40.00 MΩ / 0.01 MΩ
Accuracy:  5 % + 2

Diode Test
Range/Resolution:  2.00 V / 0.001 V
Accuracy:  0.9% + 2

Capacitance
Range/Resolution:  1000 nF / 1 nF
Range/Resolution:  10.00 µF / 0.01 µF
Range/Resolution:  100.0 µF / 0.1 µF
Range/Resolution:  9999 µF / 1 µF
Range/Resolution:  100 µF to 1000 µF
Accuracy:  1.9% + 2
Range/Resolution:  > 1000 µF
Accuracy:  5% + 20%

Lo-Z Capacitance
Range:  1 nF to 500 µF
Accuracy:  10% + 2 typical

AC amps true-rms (45 Hz to 500Hz)
Range/Resolution:  6.000 A / 0.001 A
Range/Resolution:  10.00 A / 0.01 A
Accuracy:  1.5% + 3
20 A overload for 30-seconds max
DC amps
Range/Resolution:  6.000 A / 0.001 A
Range/Resolution:  10.00 A / 0.01 A
Accuracy:  1.0% + 3
20 A overload for 30-seconds max

Hz (V or A input)2
Range/Resolution:  99.99 Hz / 0.01 Hz
Range/Resolution:  999.9 Hz / 0.01 Hz
Range/Resolution:  9.999 kHz / 0.001 kHz
Range/Resolution:  50 kHz / 0.01 kHz
Accuracy:  0.1% + 2

  • Large white LED backlight to work in poorly lit areas
  • Resistance and continuity
  • Frequency and capacitance
  • Maximum Voltage ac/dc 600V
  • 10A ac/dc current measurement (20 A overload for 30-seconds max)
  • Min/Max/Average to record signal fluctuations
  • CAT III 600 V safety rated

Recent Equipment

Become a MELD Workshop Member

We have the tools to help you turn the idea bouncing around in your head into something real. MELD Workshop is a place with the tools and equipment, classes, and materials that you need to make it happen. Membership includes access to things like:

  • 3D printers with free 3D printing
  • 50w laser cutter/engraver
  • Metal mill/drill
  • Metal lathe
  • Electronics design and testing equipment
  • Hot-air rework station and soldering irons
  • Lounge area with free coffee, comfortable seating, and WiFi provided

"It's the workshop you wish you had! With tools and equipment like 3D printers, laser cutter, electronics tools, and a members-only hang-out room, it's the place to go to turn your ideas, inventions, and weekend aspirations into the real deal."

Founder, John Schneider

Become a Member Now